1000PPR High Resolution Optical Rotary Encoder Module
$38.93
11ppr Hall Encoder 25mm Gear Motor
11ppr Hall Encoder 25mm Gear Motor
Price :
$3.38
- Information related to taxation
- Some question to contact us
- Shipping Information
encoder
Description
11ppr Hall Encoder for 25mm gear motor(370 DC motor)
Hall Encoder ENC20-370P11 is a high-performance, low-cost, two-channel incremental magnetic encoder suitable for harsh environments. Each magnetic encoder consists of a magnetic grating and a magnet sensitive detection circuit, outputting two channels of square waves with a 90° phase difference. Designed based on motor diameter and shaft dimensions, the sensor-equipped PCB is fixed by soldering to the motor’s rear electrodes, while the magnetic grating is sleeved onto the tail shaft.
It features fast response, strong shock resistance, long transmission distance, as well as long service life and high reliability even under demanding conditions.
Type: ENC20-370P11
SKU:NC20-370P11
Phase: AB phase
Voltage: 3.3-5V
Frequency: 20kHz
Resolution: 11 PPR
Output Signal: AB-phase square wave with 1/4 cycle phase difference
Operating Temperature: -40 °C to +125 °C
Interface Type: On-board PH2.0-6PIN
Wire Length: 200±10mm
Compatible Motor: 25mm gear motor(370# DC motor)
(rear shaft length ≥ 7.1mm)
Max. Measurable Speed: 109,090 RPM
PCB Thickness: 1.6mm
Magnet Ring Dimensions: Outer Diameter 13.5mm, Inner Diameter: 2mm (-0.03/–0.01 tolerance), Thickness 4.5mm
Packing list:
1x Encoder
1x single PH2.0 6pin cable
Hall Encoder ENC20-370P11 is a high-performance, low-cost, two-channel incremental magnetic encoder suitable for harsh environments. Each magnetic encoder consists of a magnetic grating and a magnet sensitive detection circuit, outputting two channels of square waves with a 90° phase difference. Designed based on motor diameter and shaft dimensions, the sensor-equipped PCB is fixed by soldering to the motor’s rear electrodes, while the magnetic grating is sleeved onto the tail shaft.
It features fast response, strong shock resistance, long transmission distance, as well as long service life and high reliability even under demanding conditions.
Type: ENC20-370P11
SKU:NC20-370P11
Phase: AB phase
Voltage: 3.3-5V
Frequency: 20kHz
Resolution: 11 PPR
Output Signal: AB-phase square wave with 1/4 cycle phase difference
Operating Temperature: -40 °C to +125 °C
Interface Type: On-board PH2.0-6PIN
Wire Length: 200±10mm
Compatible Motor: 25mm gear motor(370# DC motor)
(rear shaft length ≥ 7.1mm)
Max. Measurable Speed: 109,090 RPM
PCB Thickness: 1.6mm
Magnet Ring Dimensions: Outer Diameter 13.5mm, Inner Diameter: 2mm (-0.03/–0.01 tolerance), Thickness 4.5mm
Packing list:
1x Encoder
1x single PH2.0 6pin cable
Downloads
