24V 9000rpm Brushless Motor 24×18
RM40.50
12V 4000rpm Brushless Motor 36×50 Driver inside
12V 4000rpm Brushless Motor 36×50 Driver inside
Price :
RM87.28
- Information related to taxation
- Some question to contact us
- Shipping Information
brushless motor
Description
24V 4000rpm Brushless Motor 36×50，with driver inside.
This motor can be used at 12V, no load speed 4000rpm.
Type: MBL3650-1240
SKU: MBL3650-1240
Specification
Voltage: 12V
No Load: 4150rpm 230mA
Rated : 3400rpm, 80g.cm, 0.8A
Motor Size: 35.8x 50 mm
Shaft: OD 3.175 x 9 mm (L1 extending) (short shaft for mounting gear head)
Driver restriction current: <3A
Driver restriction voltage: <30V
Weight：190g
Wire Connections
1.BLUE WIRE(PWM): Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE(Forward/Reverse): Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE(Motor+): Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-): Connect to the motor controller’s negative (-) terminal.
6.(Power-): Connect to the power supply’s negative (-) terminal.
7.(Power+): Connect to the power supply’s positive (+) terminal.
8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!
This motor can be used at 12V, no load speed 4000rpm.
Type: MBL3650-1240
SKU: MBL3650-1240
Specification
Voltage: 12V
No Load: 4150rpm 230mA
Rated : 3400rpm, 80g.cm, 0.8A
Motor Size: 35.8x 50 mm
Shaft: OD 3.175 x 9 mm (L1 extending) (short shaft for mounting gear head)
Driver restriction current: <3A
Driver restriction voltage: <30V
Weight：190g
Wire Connections
1.BLUE WIRE(PWM): Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE(Forward/Reverse): Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE(Motor+): Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-): Connect to the motor controller’s negative (-) terminal.
6.(Power-): Connect to the power supply’s negative (-) terminal.
7.(Power+): Connect to the power supply’s positive (+) terminal.
8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!
Downloads
PDF File
Related Products
