24V 9000rpm Brushless Motor 24×18
£6.96
12V 6000rpm Brushless Motor 35.5×22
12V 6000rpm Brushless Motor 35.5×22
Price :
£11.52
- Information related to taxation
- Some question to contact us
- Shipping Information
brushless motor
Description
12V 6000rpm Brushless Motor 35.5×22
Type: MBL3525-1260
SKU: MBL3525-1260
Specification
Voltage:12V
Stall torque: 255g.cm
Stall Current: 1.523A
No Load: 6000rpm 132mA
Rated 1# Maximum Efficiency: 4599rpm, 58g.cm, 0.448A
Rated 1# Maximum Output: 3542rpm, 127.5g.cm, 0.7A
Motor Size: 35.5x 22 mm
Shaft: OD 3 x 9 mm (extending)
Weight：66g
Wire Connections
1.BLUE WIRE(PWM): Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE(Forward/Reverse): Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE(Motor+): Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-): Connect to the motor controller’s negative (-) terminal.
6.(Power-): Connect to the power supply’s negative (-) terminal.
7.(Power+): Connect to the power supply’s positive (+) terminal.
8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!
Type: MBL3525-1260
SKU: MBL3525-1260
Specification
Voltage:12V
Stall torque: 255g.cm
Stall Current: 1.523A
No Load: 6000rpm 132mA
Rated 1# Maximum Efficiency: 4599rpm, 58g.cm, 0.448A
Rated 1# Maximum Output: 3542rpm, 127.5g.cm, 0.7A
Motor Size: 35.5x 22 mm
Shaft: OD 3 x 9 mm (extending)
Weight：66g
Wire Connections
1.BLUE WIRE(PWM): Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE(Forward/Reverse): Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE(Motor+): Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-): Connect to the motor controller’s negative (-) terminal.
6.(Power-): Connect to the power supply’s negative (-) terminal.
7.(Power+): Connect to the power supply’s positive (+) terminal.
8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!
Downloads
