12V 8000rpm Brushless Motor 36×50 Driver inside

12V 8000rpm Brushless Motor 36×50，with driver inside.

Type: MBL3650-1280
SKU: MBL3650-1280

Specification
Voltage: 12V
Stall torque: 1200g.cm
Stall Current: 4.5A
No Load: 8000rpm 350mA
Rated : 6800rpm, 260g.cm, 1A
Motor Size: 35.8x 50 mm
Shaft: OD 3.175 x 15 mm (L1 extending) (short shaft for mounting gear head)

Weight：190g

Wire Connections
1.BLUE WIRE​​(PWM)​​: Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE​(Forward/Reverse)​​: Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE​(Motor+)​​: Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-)​​: Connect to the motor controller’s negative (-) terminal.
6.(Power-)​​: Connect to the power supply’s negative (-) terminal.
7.(Power+)​​: Connect to the power supply’s positive (+) terminal.
​​8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!​