24V 6000rpm Brushless Motor 35.5×22

24V 6000rpm Brushless Motor 35.5×22
This motor can be used at 12V, no load speed 3000rpm.

Type: MBL3525-2460
SKU: MBL3525-2460

Specification
Voltage: 24V
Stall torque: 357.4g.cm
Stall Current: 1.06A
No Load: 6000rpm 74mA
Rated 1# Maximum Efficiency: 4800rpm, 73.2g.cm, 0.28A
Rated 1# Maximum Output: 3489rpm, 174.6g.cm, 0.49A
Motor Size: 35.5x 22 mm
Shaft: OD 3 x 9 mm (extending)
Weight：66g

Wire Connections
1.BLUE WIRE​​(PWM)​​: Controls motor speed. Adjust speed via analog voltage (0-5V).
2.WHITE WIRE​(Forward/Reverse)​​: Controls motor rotation direction. Motor rotates CCW when the port is open; motor rotates CW when a low level (≤0.6V) is applied.
3.RED WIRE​(Motor+)​​: Connect to the motor controller’s positive (+) terminal.
4.YELLOW WIRE: FG signal output (for external devices to detect motor speed. Outputs 9 square wave pulses per motor revolution).
5.BLACK WIRE (Motor-)​​: Connect to the motor controller’s negative (-) terminal.
6.(Power-)​​: Connect to the power supply’s negative (-) terminal.
7.(Power+)​​: Connect to the power supply’s positive (+) terminal.
​​8.Remark: it is prohibited to incorrectly connect the power supply positive/negative terminals. Signal lines must not be connected to power. Damage caused by incorrect wiring is not covered!​